Minerals · Reference sheet
Potassium
Explore the catalogue reference for Potassium. Review parameters, presentation and the conditions relevant to your requirements.
Parameters from the existing public catalogue are not a lot test report. Any market references shown are indicative; confirm the supplier’s current sheet, certificate of analysis and destination requirements.
Parameters from the existing public catalogue are not a lot test report. Any market references shown are indicative; confirm the supplier’s current sheet, certificate of analysis and destination requirements.
| Parameter | Reference |
|---|---|
| Potassium Chloride (KCI) | 96.5% |
| Potassium Oxide (K₂O) | 61.0% (Guaranteed minimum: 60%) |
| Sodium Chloride (NaCl) | 2.7% |
| Moisture (H₂O) | 0.03% |
| Calcium (Ca) | 0.04% |
| Chloride (Cl) | 47.5% |
| Magnesium (Mg) | 0.04% |
| Potassium (K) | 50.6% |
| Sodium (Na) | 1.1% |
| Sulfate (SO₄) | 0.07% |
| Insoluble in water | 0.5% |
| Parameter | Reference |
|---|---|
| Retained in mesh 10 (1,700 mm) | 6% (Range: 0 - 30%) |
| Retained on mesh 14 (1,180 mm) | 31% (Range: 10 - 55%) |
| Retained on mesh 20 (0.850 mm) | 57% (Range: 20 - 85%) |
| Retained on mesh 28 (0.600 mm) | 78% (Range: 35 - 100%) |
| Retained on 35 mesh (0.425 mm) | 89% (Range: 55 - 100%) |
| Retained on mesh 48 (0.300 mm) | 95% (Range: 70 - 100%) |
| Retained on 65 mesh (0.212 mm) | 98% (Range: 72 - 100%) |
| Passing through mesh 65 | 2% (Range: 0 - 28%) |
| Parameter | Reference |
|---|---|
| Bulk density | 65–84 lb/ft³ |
| Bulk density | 1.041–1.346 kg/m³ |
| Angle of repose | 35 degrees |
Technical sheets to open or download
This sheet presents standard reference specifications. If your requirements differ, send the desired parameters, volume and destination so we can assess feasibility.
In this embedded preview, the buttons display the PDF here. Direct downloads may be blocked; outside the preview, “Download PDF” saves the file.
Presentation & packaging
Presentation to be agreed during the commercial inquiry.
Packaging, unit quantity and logistics must be confirmed for the product and transaction. The photo does not establish an available presentation.
Documentation
Request documents applicable to the product, origin and lot. Certifications should only be considered confirmed after checking issuer, scope and validity.
- Current technical sheet
- Lot analysis or test report, where required
- Origin and destination-market documents
- Inspections and certifications applicable to the transaction
Minerals
Minerals
Minerals
The next step starts with a conversationWhat is your next
Share my requirementsWhat is your next
opportunity?
Tell us what you need. Let’s align the information and assess the possibilities for your business.